EK 520 Z3D Chain Chrome: The Lightest Chain EK Builds for 1000cc
520 EK Z3D إي كي تشين جنزير تحمل عالي - BOOST BOX PERFORMANCE EK CHAINS520Z3D - 120GK
520 EK Z3D إي كي تشين جنزير تحمل عالي - BOOST BOX PERFORMANCE EK CHAINS520Z3D - 120C
520 EK Z3D إي كي تشين جنزير تحمل عالي - BOOST BOX PERFORMANCE EK CHAINS520Z3D - 120G
520 EK Z3D إي كي تشين جنزير تحمل عالي - BOOST BOX PERFORMANCE EK CHAINS520Z3D - 120G
Click to zoom in

EK 520 Z3D Chain Chrome: The Lightest Chain EK Builds for 1000cc

EK CHAINS

In stock — ready to ship

In stock — ready to ship

Out of stock

This variant is currently unavailable
Estimated restock: 2–3 weeks
﷼949.00

GOLD/BLACK 120

Pay in 4 monthly installments of 237.25

Buy Together & Save Up to

Add a matching accessory and take the discount at checkout.

﷼949.00
  • Mastercard
  • Mada
  • Bank transfer
  • tabby
  • Tamara
  • Apple Pay

VAT Included Original Products

100% Original Products

Customer Support 24/7 Support

0544887277

Fast Shipping

Delivery within 24 hours

Worldwide Delivery

Shipping across Saudi Arabia & worldwide

A 520 is the narrowest of the three common sport bike chain sizes, and the Z3D is the strongest 520 EK makes. Rated at 41.6 kN (around 9,400 lbs), approved for street use up to 1000cc, and weighing 1.69 kg per 100 links, it’s the chain riders choose when they want less rotating mass without dropping to a race-only chain. Made in Japan, sealed with QX2 X-rings, and finished in bright chrome.

Thinking About a 520 Conversion? Read This First

Most people searching for a 520 chain fall into two groups: riders whose bike came with 520 from the factory, and riders considering switching from 525 or 530. If you’re in the second group, here’s an honest answer.

What you actually save. The weight difference is real but smaller than forums claim. Comparing EK’s own figures, a 520Z weighs 1.69 kg per 100 links against 1.90 kg for a 525Z, a saving of around 210 grams on a typical chain length. Add lighter sprockets and you’re looking at a few hundred grams total, not the two or three kilograms you’ll sometimes see quoted.

Why racers still do it. On a track bike, every gram of rotating unsprung mass counts, chains get inspected constantly, and they’re replaced long before wear becomes a risk. Different conditions entirely from a street bike covering thousands of kilometres between services.

The part nobody explains. Maximum chain tension doesn’t happen at maximum horsepower. It happens during a wheelie, and the controlling factor is the combined weight of bike and rider. A heavier street bike with a rider and luggage loads the chain harder than a stripped race bike with the same engine. That’s the real reason a 520 that survives on a track bike can be marginal on the street version of the same machine.

The benefit people overlook. Gearing choice. The 520 size has the widest range of sprocket tooth counts available, so if you want to change your final drive ratio, converting opens up options you simply don’t have in 525 or 530.

Our honest position. If your bike left the factory with 520, this chain is an easy upgrade. If you’re converting a 1000cc street bike purely to save 200 grams, the gain probably isn’t worth the cost of new sprockets. If you’re converting for gearing options or you ride track days, it makes sense, and the Z3D is the strongest 520 to do it with.

Where the 520 Z3D Sits in EK’s Range

EK rates the 520 Z3D for engines from 250cc up to 1000cc on the street. Within the ThreeD line, this is the widest useful range of the three sizes, because a 520 suits everything from a mid-size naked bike to a supersport.

Across the three sizes, all share the same 5/8 inch pitch and differ only in width: 520 is 6.35 mm between the inner plates at 41.6 kN, 525 is 7.94 mm at 43.6 kN, and 530 is 9.53 mm at 49.8 kN. The strength gap between 520 and 525 is around 5%, which is smaller than most riders assume.

What Makes the Z3D Different from a Standard 520

Plates shaped to compensate for less material. A narrow chain has less metal to work with, so EK forms the outer plates with a curved, dimpled three-dimensional profile instead of leaving them flat. Stiffness comes from the shape rather than from added mass, which is how a 520 reaches 41.6 kN while staying at 1.69 kg per 100 links.

QX2 X-ring sealing. X-shaped rings in every link trap the factory grease around the pins. The X profile contacts less surface than a round O-ring, cutting friction, and EK rates it 30% more wear-resistant than their earlier QX-ring. On a narrow chain this matters more, not less, because there’s less material to lose before wear becomes critical.

Chromium carbide pins. Pin wear is what causes a chain to stretch. Coating them with chromium carbide gives a much harder surface than bare steel, directly slowing the elongation that ends a chain’s life.

Drilled inner plates and pins. EK removes material from the inner plates and drills the pin ends, taking out weight in the places where it doesn’t carry load.

Chrome plating. A clean, bright silver finish that suits a sport bike without looking loud.

Converting to 520: What the Job Involves

Changing chain size is never chain-only. You need a new front sprocket and a new rear sprocket in 520, because 520 sprockets are cut narrower and a 520 chain will not run correctly on 525 or 530 teeth.

Tooth counts carry over directly. A 530-to-520 or 525-to-520 conversion doesn’t change your gearing unless you deliberately choose different tooth counts, which is often the reason people convert in the first place.

Check front sprocket clearance. Some bikes have raised bosses or offsets on the front sprocket, and the replacement must match or be spaced correctly so the chain clears the engine case.

Installation

The chain arrives with 120 links and is cut to your bike’s exact length during fitting. Count the links on your current chain or check your manual first.

The rivet-type master link is permanent and requires a chain breaker and riveting tool. This isn’t a step to improvise. A master link that isn’t properly riveted is a common cause of chain separation, and on a narrow chain there’s no margin for a poor job. If you don’t own the tool, use a workshop.

How to Know When a Chain Is Finished

A chain doesn’t wear out evenly, and it doesn’t warn you politely. Learning to measure it is more useful than any maintenance schedule.

Measure elongation, not appearance. A chain “stretches” because the pins and bushings wear, not because the metal lengthens. Measure a fixed number of links against the spec in your manual. A chain that has elongated past the limit needs replacing regardless of how clean it looks.

Try the pull test at the rear sprocket. Pull the chain away from the rear sprocket at the three o’clock position. If you can lift it enough to see daylight under the tooth, wear is advanced.

Watch for tight spots. Rotate the wheel slowly and watch the slack. Noticeable variation at one point means uneven wear and a chain near the end of its service life.

Check the sprockets at the same time. Hooked or pointed teeth mean the sprockets are worn, and fitting a new chain to them wastes the chain.

Routine care in Gulf conditions. Fine sand bonds to lube and grinds at the rollers, so clean with a product made for X-ring chains rather than an aggressive solvent, and lube the inner face while the chain is still warm from a ride.

Who Should Buy This Chain

The owner of a supersport or mid-size sport bike that runs 520 from the factory and wants the strongest sealed chain in that size. The track day rider who needs real strength without carrying extra mass. And the rider converting to 520 for gearing flexibility who doesn’t want to compromise on chain quality to do it.

Being honest: if your bike is above 1000cc, this isn’t the right size, and the 525 or 530 Z3D is the correct choice. And if you’re converting purely for weight, the saving is modest once you’ve paid for sprockets.

Order Yours

The strongest 520 EK builds, in the size that gives you the most gearing freedom and the least rotating mass. Order now with fast delivery across Saudi Arabia and all Gulf countries. Send us your bike’s make, model, and year and we’ll confirm the size and link count before you order.

Read More
Read Less
Brand EK Chain (Enuma Chain, Japan)
Series ThreeD (Z3D)
Size 520
Pitch 15.875 mm (5/8 in)
Inner width 6.35 mm (1/4 in)
Length 120 links
Seal type QX2 X-ring
Tensile strength 41.6 kN (around 9,400 lbs)
Engine capacity 250cc to 1000cc, street
Weight 1.69 kg per 100 links
Roller diameter 10.30 mm
Pin diameter 5.38 mm
Pin length 20.8 mm
Plate thickness 2.2 mm
Plate height (inner / outer) 14.9 / 13.7 mm
Master link Rivet type MLJ, included
Finishes See available options above
Country of origin Japan

We ship your order within Saudi Arabia via Naqel or Aramex, and it typically arrives within 2 to 4 business days: about 2 days for major cities, and 3 to 4 days for other areas.

Free shipping on orders over SAR 1,500 within the Kingdom.

We also ship internationally via carriers such as FedEx and UPS. Delivery times vary by destination country.

After your order ships, you will receive a tracking number so you can follow your shipment until delivery.

You can cancel your order at any time before shipping at no charge. Special pre-order / reservation orders cannot be cancelled.

You may request a product return within 3 days of delivery, or an exchange within 7 days of delivery.

Return & exchange conditions

The product must be in its original unused condition, with the original invoice, original packaging, and all accessories included.

Returns or exchanges are not accepted if the product has been opened or its packaging tampered with, shows signs of use, damage, or improper storage, or if any accessories or parts of the original packaging are missing.

Excluded products

Some products cannot be returned or exchanged, such as: used products including footwear, clothing, and spare parts; electrical/electronic parts and batteries; personal protective clothing and gear after use or after removing accessories; and technical spare parts after installation or use.

Electronic products and batteries must be inspected within 48 hours of delivery.

Fees

When returning a resalable product, up to 25% of its value may be deducted.

For showroom purchases paid by bank card (Visa or Mastercard), if a return is requested more than 24 hours after purchase, an electronic payment processing fee of 2.5% applies.

How to return

You can request a return shipping label from customer service for SAR 30, or ship the product at your own expense.

Manufacturing defects & shipping errors

If the product has a confirmed manufacturing defect, or if a shipping error was made on our side, we will cover all related costs and provide a full refund including shipping fees.

Processing & refunds

Return and exchange requests are processed within two business days. After approval, the refund is issued the same day and may appear in your account within 1 to 7 business days depending on your bank.

Confirming that a part fits your motorcycle is the customer’s responsibility before purchase. If you are unsure, contact us before ordering and we will be happy to help.

Can I fit a 520 chain on my 525 or 530 sprockets?

No. The pitch is the same but 520 sprockets are narrower. Converting means replacing the chain and both sprockets together.

How much weight does a 520 conversion really save?

Based on EK's own figures, the chain itself is about 210 grams lighter than the equivalent 525. With lighter sprockets the total is a few hundred grams, not kilograms.

Is a 520 strong enough for a 1000cc bike?

EK rates this chain for street use up to 1000cc. Bear in mind that peak chain load relates to the combined weight of bike and rider, so a heavily loaded street bike works the chain harder than a race bike with the same engine.

Does converting change my gearing?

Not by itself. Tooth counts transfer directly. But 520 offers the widest selection of sprocket sizes, so it's the easiest size in which to change your ratio if you want to.

Is this chain genuine EK?

Yes. Made in Japan by Enuma Chain, supplied in the original ThreeD box with the part number printed on it.

What tool do I need to install it?

A chain breaker and a riveting tool. The rivet master link cannot be fitted by hand or with a clip.

Can I use it off-road?

We'd recommend a dedicated off-road chain for dirt use. This one is built and rated for the street.

What finishes are available?

This listing covers one finish. The Z3D is produced in other finishes too, so contact us if you'd like a different one.

Cookie settings on this website are set to “Allow all cookies” to give you the best experience. Please click Accept cookies to continue using the site.

Your cart

×