EK Chain 525 Master Link
In stock — ready to ship
In stock — ready to ship
Out of stock
Links Natural
Pay in 4 monthly installments of 14.25
100% Original Products
0544887277
Delivery within 24 hours
Shipping across Saudi Arabia & worldwide
EK 525 SRX2 Rivet Master Link
This is the genuine EK rivet-type master link for the 525 SRX2 chain, part number 525SRX2-MLJ in natural finish and 525SRX2-MLJ/G in gold. The packet contains the two-pin link with hollow rivet heads, the outer plate, four QX-Rings and a sachet of EK chain grease, all made in Japan.
It’s the link to buy when you’re fitting a 525 SRX2 that’s been cut to length, when a link was damaged during installation, or when the chain has been opened for a sprocket change. EK makes three connecting links for the SRX2: clip (SKJ), screw (SLJ) and this rivet link (MLJ). The rivet link is the one EK specifies for bikes above 750cc.
Fits:
- GSX-R 600 & 750 2011–2026
- GSX-R 1000-R 2017–2026
- CBR 600 RR 2013–2026
- ZX-10R 2016–2026
- S1000RR 2020–2026
What’s in the box
- One rivet connecting link with two hollow-tipped pins
- One outer plate
- Four QX-Rings
- One sachet of EK chain grease
Sold as a single link.
Match it to your chain
EK sizes each master link to its own chain series: pin diameter, plate thickness and plate hole all differ between the SRX2, MVXZ2, ZVX3 and ThreeD. This link is for the 525 SRX2. Read the outer plates of your chain; if they’re stamped SRX2, this is correct. For any other EK 525 series, order that series’ own link, such as the 525 ThreeD rivet link. It also won’t fit a 520 or 530 SRX2.
Rivet, screw or clip?
The SRX2 is often sold with EK’s SLJ screw link, which installs with a wrench and pliers. The clip link needs only pliers. This rivet link needs a chain press and riveting tool, and in return gives a joint with nothing to loosen or peel off, which is why EK specifies it above 750cc and why most workshops fit it regardless of engine size.
Fitting
- Grease the pins from the sachet and fit one QX-Ring over each pin.
- Push the link through the chain ends from the inside.
- Fit the other two QX-Rings, then the outer plate.
- Press the plate on until it’s flush with the neighbouring plates. Don’t over-press; it pinches the rings and stiffens the link.
- Flare each hollow pin head with the riveting tool to the diameter on the packet, checked with a caliper.
- Confirm the link pivots freely.
A master link is single-use. Never refit one that’s been pressed or flared, and never fit a clip link in place of this one on a bike over 750cc.
We ship your order within Saudi Arabia via Naqel or Aramex, and it typically arrives within 2 to 4 business days: about 2 days for major cities, and 3 to 4 days for other areas.
Free shipping on orders over SAR 1,500 within the Kingdom.
We also ship internationally via carriers such as FedEx and UPS. Delivery times vary by destination country.
After your order ships, you will receive a tracking number so you can follow your shipment until delivery.
You can cancel your order at any time before shipping at no charge. Special pre-order / reservation orders cannot be cancelled.
You may request a product return within 3 days of delivery, or an exchange within 7 days of delivery.
Return & exchange conditions
The product must be in its original unused condition, with the original invoice, original packaging, and all accessories included.
Returns or exchanges are not accepted if the product has been opened or its packaging tampered with, shows signs of use, damage, or improper storage, or if any accessories or parts of the original packaging are missing.
Excluded products
Some products cannot be returned or exchanged, such as: used products including footwear, clothing, and spare parts; electrical/electronic parts and batteries; personal protective clothing and gear after use or after removing accessories; and technical spare parts after installation or use.
Electronic products and batteries must be inspected within 48 hours of delivery.
Fees
When returning a resalable product, up to 25% of its value may be deducted.
For showroom purchases paid by bank card (Visa or Mastercard), if a return is requested more than 24 hours after purchase, an electronic payment processing fee of 2.5% applies.
How to return
You can request a return shipping label from customer service for SAR 30, or ship the product at your own expense.
Manufacturing defects & shipping errors
If the product has a confirmed manufacturing defect, or if a shipping error was made on our side, we will cover all related costs and provide a full refund including shipping fees.
Processing & refunds
Return and exchange requests are processed within two business days. After approval, the refund is issued the same day and may appear in your account within 1 to 7 business days depending on your bank.
Confirming that a part fits your motorcycle is the customer’s responsibility before purchase. If you are unsure, contact us before ordering and we will be happy to help.


































































