EK Z3D من ايكي 3دي RIVET MASTER LINK قفل جنزير 525 - BOOST BOX PERFORMANCE EK CHAINS525/3D - MLJ/C
EK Z3D من ايكي 3دي RIVET MASTER LINK قفل جنزير 525 - BOOST BOX PERFORMANCE EK CHAINS525/3D - MLJ/G
EK Z3D من ايكي 3دي RIVET MASTER LINK قفل جنزير 525 - BOOST BOX PERFORMANCE EK CHAINS525/3D - MLJ/K
EK Z3D من ايكي 3دي RIVET MASTER LINK قفل جنزير 525 - BOOST BOX PERFORMANCE EK CHAINS525/3D - MLJ/K
Click to zoom in

EK Z3D RIVET MASTER LINK 525

EK CHAINS

In stock — ready to ship

In stock — ready to ship

Out of stock

This variant is currently unavailable
Estimated restock: 2–3 weeks
﷼62.00

Links Natural

Pay in 4 monthly installments of 15.50
﷼62.00
  • Mastercard
  • Mada
  • Bank transfer
  • tabby
  • Tamara
  • Apple Pay

VAT Included Original Products

100% Original Products

Customer Support 24/7 Support

0544887277

Fast Shipping

Delivery within 24 hours

Worldwide Delivery

Shipping across Saudi Arabia & worldwide

This is the genuine EK rivet-type master link for the ThreeD (3D) 525 Z chain, part number 525Z/3D-MLJ. It includes the two-pin link, the outer plate and four QX2-Rings, all made in Japan, and it’s the only connecting link EK approves for joining a 3D 525 Z chain.

Use it when you’re fitting a new 3D 525 Z chain that was cut to length, replacing a link that was damaged during installation, or re-joining a chain after a sprocket change that needed the chain opened.

What’s in the box

  • One rivet connecting link with two hollow-tipped pins, pre-greased
  • One outer plate
  • Four QX2-Rings

Sold as a single link. No instructions included.

Why it only fits the 3D 525 Z chain

A master link has to match its chain in three dimensions: pin diameter, plate thickness and plate hole size. EK’s ThreeD chain uses a forged outer plate with a different profile and thickness from the stamped plates on the SRX2, ZVX3 or MVXZ series, and the pins are sized to match. A link from another series will either not press on or will not hold its flare.

Check the stamping on your chain’s outer plates. If it reads ThreeD or 3D Z, this is the correct link. If it reads ZVX3, SRX2 or MVXZ, order the link for that series instead.

Why rivet and not clip

A clip-type link relies on a spring clip to hold the outer plate on. Under the load a 600 to 1000cc engine puts through a 525 chain, that clip can work loose, and a thrown chain at speed can lock the rear wheel or crack the engine case. A rivet link is pressed on and the pin heads are flared, so there is nothing to come off. EK specifies rivet links for all its sport and supersport chains, and most manufacturers prohibit clip links above 750cc.

How to fit it

You need a chain press and rivet tool. Standard pliers and a hammer are not acceptable for a 525 rivet link.

  1. Clean the ends of the chain and check that the inner plates are undamaged.
  2. Fit one QX2-Ring over each pin on the link and push the link through the chain ends from the inside.
  3. Fit the remaining two QX2-Rings over the pins on the outside, then place the outer plate on.
  4. Press the outer plate on with the tool until it sits flush with the neighbouring outer plates. Do not press past this point; an over-pressed plate pinches the rings and creates a stiff link.
  5. Flare each hollow pin head with the riveting anvil until the flared diameter matches the figure printed on the link packaging. Measure with a vernier caliper.
  6. Check the link moves freely. A stiff link means the plate is too tight or the pin is over-flared, and the link must be replaced.

Never re-use a master link once it’s been pressed or flared, even if it looks undamaged. Fit a new one.

When to replace the master link

Replace it whenever you replace the chain, whenever the chain has been opened for any reason, and immediately if you find a crack at a pin head, a flare that has started to close, or a link that has gone stiff. A master link in doubt is not worth the risk of a thrown chain.

Read More
Read Less
Part number 525Z/3D-MLJ (/K black, /G gold, /C chrome)
Pitch 525 (15.875 mm)
Fits EK ThreeD 525 Z chain only
Link type Rivet, hollow-tipped pins
Seal QX2-Ring, four supplied
Finish Black, gold or chrome
Made in Japan

We ship your order within Saudi Arabia via Naqel or Aramex, and it typically arrives within 2 to 4 business days: about 2 days for major cities, and 3 to 4 days for other areas.

Free shipping on orders over SAR 1,500 within the Kingdom.

We also ship internationally via carriers such as FedEx and UPS. Delivery times vary by destination country.

After your order ships, you will receive a tracking number so you can follow your shipment until delivery.

You can cancel your order at any time before shipping at no charge. Special pre-order / reservation orders cannot be cancelled.

You may request a product return within 3 days of delivery, or an exchange within 7 days of delivery.

Return & exchange conditions

The product must be in its original unused condition, with the original invoice, original packaging, and all accessories included.

Returns or exchanges are not accepted if the product has been opened or its packaging tampered with, shows signs of use, damage, or improper storage, or if any accessories or parts of the original packaging are missing.

Excluded products

Some products cannot be returned or exchanged, such as: used products including footwear, clothing, and spare parts; electrical/electronic parts and batteries; personal protective clothing and gear after use or after removing accessories; and technical spare parts after installation or use.

Electronic products and batteries must be inspected within 48 hours of delivery.

Fees

When returning a resalable product, up to 25% of its value may be deducted.

For showroom purchases paid by bank card (Visa or Mastercard), if a return is requested more than 24 hours after purchase, an electronic payment processing fee of 2.5% applies.

How to return

You can request a return shipping label from customer service for SAR 30, or ship the product at your own expense.

Manufacturing defects & shipping errors

If the product has a confirmed manufacturing defect, or if a shipping error was made on our side, we will cover all related costs and provide a full refund including shipping fees.

Processing & refunds

Return and exchange requests are processed within two business days. After approval, the refund is issued the same day and may appear in your account within 1 to 7 business days depending on your bank.

Confirming that a part fits your motorcycle is the customer’s responsibility before purchase. If you are unsure, contact us before ordering and we will be happy to help.

Does this fit the EK ZVX3 or SRX2 525 chain?

No. It fits the ThreeD 525 Z chain only. Each EK series has its own link.

Is it a rivet or clip link?

Rivet. The hollow pin heads are flared with a riveting tool after the plate is pressed on.

Are the X-rings included?

Yes, four QX2-Rings are in the pack.

Can I fit it without a special tool?

No. A chain press and rivet tool is required to press the plate and flare the pins correctly.

What colours are available?

Black (/K), gold (/G) and chrome (/C), matched to the chain finishes.

Is it made in Japan?

Yes, by EK (Enuma Chain Manufacturing), stamped JAPAN on the plates.

Cookie settings on this website are set to “Allow all cookies” to give you the best experience. Please click Accept cookies to continue using the site.

Your cart

×