530 إي كي تشين قفل جنزير - BOOST BOX PERFORMANCE EK CHAINS591EB9
530 إي كي تشين قفل جنزير - BOOST BOX PERFORMANCE EK CHAINS591EB9
Click to zoom in

530 EK CHAIN TRACK LOCK

EK CHAINS

In stock — ready to ship

In stock — ready to ship

Out of stock

This variant is currently unavailable
Estimated restock: 2–3 weeks
﷼57.00

Link Natural

Pay in 4 monthly installments of 14.25
﷼57.00
  • Mastercard
  • Mada
  • Bank transfer
  • tabby
  • Tamara
  • Apple Pay

VAT Included Original Products

100% Original Products

Customer Support 24/7 Support

0544887277

Fast Shipping

Delivery within 24 hours

Worldwide Delivery

Shipping across Saudi Arabia & worldwide

EK 530 Master Link: Which Type Do You Actually Need?

A master link is the single piece that joins the two ends of your chain. EK makes four different types for 530 chains, and they are not interchangeable. Choosing correctly matters more than almost any other part of a chain job, because this is the one joint that wasn’t assembled at the factory. Each link ships with its O-ring seals and a grease sachet.

This is the MLJ rivet link for the EK 530 SRX2 series, matching the EK 530 SRX2-120 chain.

Fits:

EK’s Four Connecting Link Types

This is the information that decides your order. EK uses a letter code for each type, and it’s printed on the packaging.

MLJ, the rivet type. EK’s standard connecting link for sealed chains, and the strongest option. The pin ends are hollow and get flared outward with a riveting tool, which locks the outer plate permanently. It requires a chain riveting tool, and it cannot be fitted by hand. This is what high-power machines should use.

SLJ, the screw type. A clever alternative that gives a rivet-like fit using only a wrench and a hex key. EK developed it for racers who needed a secure link without carrying a riveting tool. If you don’t own the tool and your chain series offers this type, it’s the sensible choice.

SKJ, the semi-press fit clip type. The outer plate is a semi-press fit, so it won’t go on by hand and needs tools to press into position. Once pressed, a clip slides into the groove on the pin to hold it. More secure than a plain clip link because of the tighter plate fit.

SPJ, the plain clip type. The outer plate is a loose fit with clearance, so it goes on easily and the clip holds it. The easiest to install, and the least secure of the four. EK notes that grease can leak between the loose-fit link plates, so sealing isn’t as good.

How to Choose

If your bike makes serious power, use the rivet link. There’s no substitute for a properly flared MLJ on a machine that loads the chain hard. Buy or borrow the tool, or have a workshop fit it.

If you don’t have a riveting tool, look for the screw type. It’s the closest thing to rivet security without the tool, where your chain series offers it.

Use a clip link only where it’s the correct specification for your chain. If your chain came with a clip link from the factory and your bike is in the lower power range, a clip link is appropriate. Don’t downgrade a chain that came with a rivet link to a clip link because the clip is easier.

Never mix types across series. A link from a different EK chain series won’t fit, regardless of the type code, because plate thickness, pin length, and seal design differ between series.

Before You Order, Check Two Things

Which EK series is your chain? EK produces many 530 chains: the standard range, the SRX, the MVXZ, the DR and DRZ, the ThreeD, the ZVX and others. Each has its own connecting link. Look at the side plates of your chain, where the designation is stamped, and clean them with a rag first because grime hides the marking.

Which link type did it come with? If you still have the original packaging or the link you removed, that answers the question directly. Otherwise, the chain’s product code and your purchase record will tell you.

Not sure? Send us a clear close-up photo of a clean section of your chain’s side plates and we’ll identify both the series and the correct link for you before you order.

What You Get

  • The connecting link. The inner link section with its pins, plus the separate outer plate.
  • O-ring seals. They sit between the inner and outer plates on each pin and hold the lubricant inside the joint. Position matters, and if they’re installed wrong the joint doesn’t seal.
  • A grease sachet. This is the lubricant that lives inside the sealed joint for the life of the link. It goes on during assembly. Once the link is closed, there’s no way to add it.

Sold individually, one link per package.

Fitting Notes by Type

Rivet (MLJ). Grease the pins and seals, assemble with the seals correctly positioned, press the outer plate to the same width as the chain’s other links, then flare both pin ends evenly with the riveting tool. Check that the finished link flexes as freely as its neighbours.

Screw (SLJ). Grease and assemble as above, then tighten the screws to secure the plate using a wrench and hex key. Follow the torque guidance supplied with the link.

Semi-press clip (SKJ). The outer plate must be pressed into position with a tool, not forced by hand. Once it’s seated so the pin groove is exposed, slide the clip into the groove. Check the clip is fully seated.

Clip (SPJ). The plate fits more easily, then the clip goes into the groove. Always fit the clip with its closed end facing the direction of chain travel, so it can’t be knocked off by debris.

For any clip type, inspect the clip after your first ride and at every chain service. A missing clip means the chain comes apart.

Rules That Apply to All Types

  • Never reuse a rivet link. Riveting permanently deforms the pin ends. A reused rivet link looks fine and isn’t.
  • Never substitute a clip link for a rivet link on a chain that was supplied with a rivet link. The chain was specified that way for a reason.
  • Fit the seals that came with it. Old or missing seals mean the joint loses its grease, and that’s where chain wear starts.
  • Check the link moves freely. A stiff master link creates a tight spot that wears the whole chain unevenly.

Order Yours

The right link, the right type, matched to your chain. Order now with fast delivery across Saudi Arabia and all Gulf countries. Send us a photo of your chain’s side plates and we’ll confirm the series and link type before you buy.

Read More
Read Less

We ship your order within Saudi Arabia via Naqel or Aramex, and it typically arrives within 2 to 4 business days: about 2 days for major cities, and 3 to 4 days for other areas.

Free shipping on orders over SAR 1,500 within the Kingdom.

We also ship internationally via carriers such as FedEx and UPS. Delivery times vary by destination country.

After your order ships, you will receive a tracking number so you can follow your shipment until delivery.

You can cancel your order at any time before shipping at no charge. Special pre-order / reservation orders cannot be cancelled.

You may request a product return within 3 days of delivery, or an exchange within 7 days of delivery.

Return & exchange conditions

The product must be in its original unused condition, with the original invoice, original packaging, and all accessories included.

Returns or exchanges are not accepted if the product has been opened or its packaging tampered with, shows signs of use, damage, or improper storage, or if any accessories or parts of the original packaging are missing.

Excluded products

Some products cannot be returned or exchanged, such as: used products including footwear, clothing, and spare parts; electrical/electronic parts and batteries; personal protective clothing and gear after use or after removing accessories; and technical spare parts after installation or use.

Electronic products and batteries must be inspected within 48 hours of delivery.

Fees

When returning a resalable product, up to 25% of its value may be deducted.

For showroom purchases paid by bank card (Visa or Mastercard), if a return is requested more than 24 hours after purchase, an electronic payment processing fee of 2.5% applies.

How to return

You can request a return shipping label from customer service for SAR 30, or ship the product at your own expense.

Manufacturing defects & shipping errors

If the product has a confirmed manufacturing defect, or if a shipping error was made on our side, we will cover all related costs and provide a full refund including shipping fees.

Processing & refunds

Return and exchange requests are processed within two business days. After approval, the refund is issued the same day and may appear in your account within 1 to 7 business days depending on your bank.

Confirming that a part fits your motorcycle is the customer’s responsibility before purchase. If you are unsure, contact us before ordering and we will be happy to help.

Cookie settings on this website are set to “Allow all cookies” to give you the best experience. Please click Accept cookies to continue using the site.

Your cart

×