EK 520ZVX3-150 Chain: The 520 That Handles 1200cc
In stock — ready to ship
In stock — ready to ship
Out of stock
Link Gold
Pay in 4 monthly installments of 245.00
100% Original Products
0544887277
Delivery within 24 hours
Shipping across Saudi Arabia & worldwide
A 520 is normally the size you choose when you want less rotating mass and accept a lower power limit in exchange. The ZVX3 changes that trade. EK rates this chain for street use up to 1200cc, which is 200cc more than their own ThreeD chain in the same size, and it carries their highest wear life rating. At 3.97 lbs per 100 links it’s still the lightest chain in the ZVX3 range. 150 links, made in Japan, available in a choice of finishes.
Why This Changes What a 520 Can Do
Compare EK’s own figures across their 520 chains and the picture is clear. The ThreeD 520 Z3D is rated for 1000cc street. This ZVX3 is rated for 1200cc. Same size, same pitch, same sprockets, 200cc more capability.
Worth being precise about where that comes from. The tensile strength figures for the two are close, so this isn’t a case of one chain being dramatically stronger in a straight pull. The higher rating comes from the ZVX3’s construction: tighter clearance between the plates for greater stiffness, the newer NX-ring seal, and a wear life index of 2,000 against EK’s standard non-sealed chain at 100.
What that means practically: if you want the weight advantage of a 520 on a machine making more power than a 520 usually suits, this is the chain that makes it possible. It’s the reason 520 conversions work on bikes where they otherwise wouldn’t.
Why 150 Links on the Narrowest Size?
A long chain on the lightest size is an unusual combination, and it exists for a specific kind of build.
Stretched swingarms. EK developed the ZVX line with modified sport bikes in mind, including machines with extended swingarms. Extend the arm and the chain run grows well beyond what 120 links cover.
Converted bikes with big rear sprockets. Riders who convert to 520 often do it for gearing freedom, and 520 has the widest range of sprocket tooth counts. A much larger rear sprocket adds chain length.
Both at once. The common case is a bike that’s been stretched and converted to 520, where the owner wants the length and the minimum rotating mass together. That combination is exactly what this part number covers.
You can always cut a chain shorter but never add to it. Count the links on your current chain before you buy. If your bike needs 120 or fewer, buy that length rather than paying for links you’ll remove.
The Lightest Chain in the Range
Across EK’s ZVX3 chains, weight per 100 links runs 3.97 lbs for the 520, 4.52 lbs for the 525, and 4.85 lbs for the 530. The 520 saves roughly 400 grams per 100 links against the 530.
That matters more than the same weight elsewhere on the bike, because chain weight is unsprung rotating mass. It affects acceleration and how the suspension behaves over its travel. On a long chain run, there’s simply more of it, which is why choosing the lightest size that your power level allows is worth thinking about.
Converting to 520 With This Chain
If you’re moving down from 525 or 530, the chain is only part of the job.
New sprockets are mandatory. 520 sprockets are cut narrower. A 520 chain will not run correctly on 525 or 530 teeth, so both front and rear must be replaced.
Your gearing stays the same unless you change it. Tooth counts transfer directly across sizes. If you want a different final drive ratio, 520 is the size that gives you the most options to choose from.
Check front sprocket clearance. Some bikes have raised bosses or offsets on the front sprocket. The replacement must match, or be correctly spaced, so the chain clears the engine case.
Confirm your power level fits. The 1200cc street rating is what makes this conversion sensible on a larger machine. Above that figure, stay with 525 or 530.
Before You Order
Your bike must run 520 sprockets, or you must be converting to them. The size is stamped on the front sprocket and usually printed on your current chain’s side plates.
Your displacement should be at or under 1200cc for street use.
Your chain run should actually need more than 120 links.
This is a street and track chain. For dirt and desert riding, choose a chain built for off-road.
Send us your bike’s make, model, year, sprocket sizes, and swingarm setup, and we’ll work out the correct length with you before you order.
What a Long Chain Demands
A 150-link chain behaves differently from a short one, and three things need more attention than usual.
Slack changes more across the suspension travel. A longer chain run means a greater change in effective chain length as the swingarm moves through its arc. Set your slack with the bike loaded as you actually ride it, and check it at the position where the chain is tightest through the travel, not just where it sits at rest.
Chain slap gets worse. More chain between the sprockets means more unsupported length that can oscillate and strike the swingarm. If your bike has a chain slider or guide, inspect it, because a worn slider lets the chain hit bare metal. Correct slack is the first defence against slap.
Alignment errors multiply. A small misalignment at the front sprocket becomes a much larger error at the rear over a long chain run. On a stretched bike this is the single fastest way to ruin a good chain. Check alignment every time you adjust slack, not occasionally.
Beyond that, the usual applies in this climate. Fine sand bonds to chain lube and grinds at the rollers, so clean with a product made for sealed chains rather than a harsh solvent, which attacks the NX-ring seals. Lube the inner face while the chain is warm from riding and wipe off the excess.
Who Should Buy This Chain
The rider with a stretched 520 build who wants the length and the lightest option together. The rider converting a larger machine to 520 for gearing freedom, where the 1200cc rating makes the conversion viable. And the track day rider who wants minimum rotating mass without compromising on chain life.
Being honest: if your bike is standard and takes 120 links or fewer, buy that length. If your machine makes more than 1200cc, step up to 525 or 530. And if weight is your only concern, EK’s ThreeD 520 is lighter still, though rated lower.
Order Yours
The lightest chain EK makes in its strongest street series, long enough for a stretched build, and rated for more power than a 520 usually carries. Order now with fast delivery across Saudi Arabia and all Gulf countries. Tell us your bike, sprocket sizes, and swingarm setup, and we’ll confirm the length before you order.
| Brand | EK Chain (Enuma Chain, Japan) |
|---|---|
| Series | ZVX3 (Extreme Sportbike) |
| Size | 520 |
| Pitch | 15.875 mm (5/8 in) |
| Length | 150 links, cut to size on fitting |
| Seal type | NX-ring |
| Tensile strength | 9,400 lbs |
| Wear life index | 2,000 (standard chain = 100) |
| Engine capacity | Up to 1200cc, street |
| Weight | 3.97 lbs per 100 links (around 1.80 kg) |
| Master link | Rivet type (MLJ), included |
| Finishes | See available options above |
| Country of origin | Japan |
We ship your order within Saudi Arabia via Naqel or Aramex, and it typically arrives within 2 to 4 business days: about 2 days for major cities, and 3 to 4 days for other areas.
Free shipping on orders over SAR 1,500 within the Kingdom.
We also ship internationally via carriers such as FedEx and UPS. Delivery times vary by destination country.
After your order ships, you will receive a tracking number so you can follow your shipment until delivery.
You can cancel your order at any time before shipping at no charge. Special pre-order / reservation orders cannot be cancelled.
You may request a product return within 3 days of delivery, or an exchange within 7 days of delivery.
Return & exchange conditions
The product must be in its original unused condition, with the original invoice, original packaging, and all accessories included.
Returns or exchanges are not accepted if the product has been opened or its packaging tampered with, shows signs of use, damage, or improper storage, or if any accessories or parts of the original packaging are missing.
Excluded products
Some products cannot be returned or exchanged, such as: used products including footwear, clothing, and spare parts; electrical/electronic parts and batteries; personal protective clothing and gear after use or after removing accessories; and technical spare parts after installation or use.
Electronic products and batteries must be inspected within 48 hours of delivery.
Fees
When returning a resalable product, up to 25% of its value may be deducted.
For showroom purchases paid by bank card (Visa or Mastercard), if a return is requested more than 24 hours after purchase, an electronic payment processing fee of 2.5% applies.
How to return
You can request a return shipping label from customer service for SAR 30, or ship the product at your own expense.
Manufacturing defects & shipping errors
If the product has a confirmed manufacturing defect, or if a shipping error was made on our side, we will cover all related costs and provide a full refund including shipping fees.
Processing & refunds
Return and exchange requests are processed within two business days. After approval, the refund is issued the same day and may appear in your account within 1 to 7 business days depending on your bank.
Confirming that a part fits your motorcycle is the customer’s responsibility before purchase. If you are unsure, contact us before ordering and we will be happy to help.
Is a 520 really strong enough for a 1200cc bike?
EK rates this specific chain for street use up to 1200cc, which is higher than any other 520 in their range. Within that rating, yes. It's also worth remembering that peak chain load relates to the combined weight of bike and rider, so a heavily loaded machine works a chain harder than a stripped one with the same engine.
How is this different from EK's ThreeD 520?
Different series. The ZVX3 is rated to 1200cc with the NX-ring seal and a wear life index of 2,000. The ThreeD 520 is rated to 1000cc, uses QX2 seals, and is slightly lighter. Choose the ZVX3 for capability and service life, the ThreeD for minimum weight.
My bike needs 128 links. Can I use this?
Yes. The chain is cut to length during fitting, so any requirement at or below 150 works from this box.
Do I need new sprockets to convert to 520?
Yes, both of them. 520 sprockets are narrower and a 520 chain won't run correctly on wider teeth.
Does converting to 520 change my gearing?
Not by itself. Tooth counts carry over. But 520 offers the widest selection of sprocket sizes if you do want to change your ratio.
Can I fit it without a riveting tool?
Not with the supplied rivet link. EK's screw-type link is sold separately and installs with a wrench and hex key.
Why does a long chain need more attention?
Slack varies more across the suspension travel, chain slap is worse, and alignment errors magnify over the length. All three are manageable, but they need checking more often.
Is it genuine?
Yes. Made in Japan by Enuma Chain and supplied in the original EK box with the part number printed on it.


































































